***************************************************************************** BLDUX.TXT ***************************************************************************** LSI Logic SDMS 4.0 PCI SCO UnixWare C8XX HBA Diskette Building Instructions To create a C8XX HBA diskette to use with UnixWare 2.1.3 and UnixWare 7, you must copy the raw dd image file onto a 1.44 Mbytes diskette. The process for doing this depends upon what operating system you are using to create the diskette. * * * * * * * * * * * * * * * * * * * * * * * * * * For UNIX System Users Follow these steps to create the BTLD diskette: 1. Insert a 3.5-inch blank diskette into the diskette drive. At the UNIX prompt, type: dd if=//unixware.dd of=/dev/fd0 The is where the dd image is located. 2. For UnixWare 2.1.3, the dd image file is located here: {UNIX CD-ROM path}/DRIVERS/UNIXES/UNIXWARE/UW213/UNIXWARE.DD 3. For UnixWare 7, the dd image file is located here: {UNIX CD-ROM path}/DRIVERS/UNIXES/UNIXWARE/UW7/UNIXWARE.DD This command will dd the image to the blank diskette to create a BTLD diskette.  * * * * * * * * * * * * * * * * * * * * * * * * * * For DOS and Windows System Users 1. Use a utility that will copy the raw dd image onto a 1.44 Mbytes diskette. FDIMAGE.EXE is a public domain utility and is available on this SDMS CD-ROM. Instructions for using this utility are included in its accompanying FDIMAGE.TXT file. 2. For UnixWare 2.1.3, the dd image is located here: {CD-ROM Drive Letter}:\DRIVERS\UNIXES\UNIXWARE\UW213\UNIXWARE.DD 3. For UnixWare 7, the dd image is located here: {CD-ROM Drive Letter}:\DRIVERS\UNIXES\UNIXWARE\UW7\UNIXWARE.DD 4. FDIMAGE.EXE is located in this directory on the SDMS CD-ROM: {CD-ROM Drive Letter}:\DRIVERS\UNIXES\FDIMAGE.EXE After the image has been copied to a 3.5-inch diskette, use this BTLD diskette for SCO UnixWare installations as instructed.