*****************************************************************************
                               BLDSCO.TXT
*****************************************************************************
SDMS 4.0 SCO UNIX OpenServer 5

Building the SCO OpenServer BTLD Diskette

To create a BTLD diskette for SCO OpenServer 5 installations, copy the 
raw dd image file onto a 1.44 Mbytes diskette. This process is dependent
upon the operating system that you are using to create this diskette. 
See the instructions below for UNIX System or DOS and Windows System Users.

*  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *

For UNIX System Users

Follow these steps to create the BTLD diskette:
 
1. Insert a 3.5-inch blank diskette into the floppy drive. 

2. At the UNIX prompt, type: 

   dd if=/<path>/sco.dd of=/dev/fd0

   The <path> is where the dd image is located. On this CD-ROM, the dd
   image file is located here:

   {UNIX CD-ROM path}/DRIVERS/UNIXES/OPNSERVR/SCO.DD

   This command will dd the image to the blank diskette to create a BTLD 
   diskette.
 
*  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *

For DOS and Windows System Users

1. Use a utility that will copy the raw dd image onto a 1.44 Mbytes 
   diskette. FDIMAGE.EXE is a public domain utility and is available on 
   this SDMS CD-ROM. Instructions for using this utility are included in its  
   accompanying FDIMAGE.TXT file. 

2. The dd image is located here:

   {CD-ROM Drive Letter}:\DRIVERS\UNIXES\OPNSERVR\SCO.DD

3. FDIMAGE.EXE is located in this directory on the SDMS CD-ROM:

   {CD-ROM Drive Letter}:\DRIVERS\UNIXES\FDIMAGE.EXE

   After the image has been copied to a 3.5-inch diskette, use this BTLD 
   diskette for SCO OpenServer installations as instructed.