*****************************************************************************
                               BLDSYMCASL.TXT
*****************************************************************************
SDMS PCI SYMCASL Driver Update

Building the SYMCASL Driver Update Diskette

To create a SYMCASL diskette for Solaris installations, copy the raw symitu.dd
image file onto a 1.44 Mbytes floppy diskette. This process is dependent upon
the operating system that you are using to create this diskette. See the
instructions below for UNIX System and DOS System Users.

*  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *

For UNIX System Users

Follow these steps to create the SYMCASL Driver Update diskette: 

1. Insert a 3.5" diskette into the floppy diskette drive. 

2. At the UNIX prompt, type: 

    #volcheck -v

    #dd if=/<path>/symcasl.dd of=/vol/dev/aliases/floppy0 bs=32768

    #eject floppy

   The <path> is where the dd image is located. On this CD-ROM, the dd
   image file is located here:

   {UNIX CD-ROM path}/DRIVERS/FUSNMPT/FIBCH/UNIXES/SOLARIS/SYMCASL.DD

  
    This command will dd the image to the floppy diskette to create a
    SYMCASL diskette.

3.  Label this diskette SYMCASL Driver Update.


*  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  

For DOS System Users

1. Use a utility that will copy the raw dd image onto a 1.44 Mbytes floppy
   diskette. RAWRITE3.COM, which is a public domain utility, is available on 
   this CD-ROM. Instructions for using this utility are included in its  
   accompanying RAWRITE3.DOC file. 

   The dd image is located here:

   {DOS CD-ROM path}:\DRIVERS\FUSNMPT\FIBCH\UNIXES\SOLARIS\SOLARIS\SYMCASL.DD

2. RAWRITE3.COM is included on this CD-ROM at this location: 

   {DOS CD-ROM path}:\DRIVERS\FUSNMPT\FIBCH\UNIXES\RAWRITE3.COM

   After the image has been copied to a 3.5" diskette, use this SYMCASL
   diskette for Solaris installations as instructed.