 |
|
Picosecond Pulsed Diode Laser Driver with CW Option  |
PDL 800-D |
Specifications
| Internal Oscillator |
|
|
| Type |
|
Crystal locked |
| Operation mode |
|
Pulsed or continuous wave |
| Base frequencies |
|
80 MHz, 1 MHz (selectable) |
| Repetition frequencies |
|
user-selectable: 1, 1/2, 1/4, 1/8, 1/16, 1/32 of base frequency
80, 40, 20, 10, 5 or 2.5 MHz (80 MHz base)
1000, 500, 250, 125, 62.5 or 31.25 kHz (1 MHz base) |
|
| External Trigger Input |
|
|
| Amplitude |
|
-5 V to +5 V (maximum limits) |
| Trigger level (adjustable) |
|
-1 V to +1 V (negative slope) |
| Required pulse width |
|
> 5 ns |
| Delay |
|
35 ± 5 ns (from trigger input to optical output), jitter <20 ps |
| Frequency range |
|
10 Hz to 80 MHz |
| Impedance |
|
50 Ohms (dynamic)
>500 Ohms (static) |
| Connector type |
|
BNC socket (female) |
|
| Synchronization Output |
|
|
| Amplitude |
|
< -800 mV into 50 Ohms (NIM) |
| Pulse width |
|
6 ns |
| Delay |
|
12 ns (from falling edge to laser output), jitter < 20 ps |
| Internal impedance |
|
50 Ohms |
| Connector type |
|
SMA socket (female) |
|
| Gating inputs |
|
|
| Slow gate |
|
Transition time <1 ms (pulsed and cw operation) |
| Fast gate |
|
Transition time typ. 10 ns (pulsed only) |
|
| Remote interlock |
|
|
| Voltage |
|
< 7 VDC |
| Loop resistance |
|
10 Ohms max. |
|
| Power Supply |
|
|
| Line Voltage |
|
220/240 or 110/120 VAC, 50/60 Hz |
| Power consumption |
|
45 Watts max. |
|
| Dimensions |
|
|
| Base Unit: |
|
Width: 237 mm |
|
|
Depth: 310 mm |
|
|
Height: 97 mm |
|
| Temperature range |
|
10 - 40 �C |
|
All
Information given here is reliable to our best knowledge. However, no
responsibility is assumed for possible inaccuracies or ommisions.
Specifications and external appearences are subject to change without
notice.
© PicoQuant GmbH, 1998 - 2007
last updated 11.06.2007
|
