Hawaii Array Pinouts and Connections

Description	DB's 	Harness	Voltage Set to:
	15&25
VOFFSET	25-1 	015-1	+3.7 volts
VRESET	25-2	015-2	+0.50 Volts
VD ANALOG	25-3	015-3	+5.0 Volts
GND	25-4	09-6	Gnd
RESET CLOCK	25-5	37-1	+4.0 to 0.15 volts
LINE CLOCK	25-6	37-2	+4.0 to 0.15 volts
LSYNC CLOCK	25-7	37-3	+4.0 to 0.15 volts
FSYNC CLOCK	25-8	37-4	+4.0 to 0.15 volts
PIXEL CLOCK	25-9	37-5	+4.0 to 0.15 volts
READ CLOCK	25-10	37-6	+4.0 to 0.15 volts
ICTL BIAS	25-12	015-4	+3.7 volts
DIGITAL POWER	25-13	015-5	+4.00 volts
VOUT 1 (PREAMP)	15-1	09-2
VOUT 2 (PREAMP)	15-2	09-4
VOUT 3 (PREAMP)	15-3	19-2
VOUT 4 (PREAMP)	15-4	19-4
+15VDC	15-13	015-9	+15.00 Volts
-15VDC	15-15	015-10	-15.00 Volts

Grounding Scheme:
	DB25 pin 4 goes to 09-6 and case, 09-8 and 09-9 goes to 19-6 and 19-7 respectively, 19-8 and  19-9 goes to 37-22 and 37-23
.
Naming Scheme:
	09-# means the 9 pin connector on Video board #0, 115-# means the 15 pin connector on
Video board #1, etc.  37-# means the Clock Driver 37 pin connector.